探地雷达在莲花电站二坝坝顶路面裂缝探测中的应用

介绍探地雷达探测方法,探讨使用高频探地雷达探测粘土心墙堆石坝坝顶混凝土路面裂缝,达到快速、无损查明坝顶混凝土裂缝的性质与成因的目的.     

现浇混凝土构件与砌体接触面收缩和温度应力裂纹的探讨

分析讨论了建筑物由于收缩及温度应力而引起的过纹，提出了在设计施工中应考虑的问题和采取的防止措施。     

镀锡板生产线深基坑施工实践

采用钻孔灌注桩作为深地坑的围护结构，在坑内设排水沟、集水井排水。成功地在珠江三角洲地区狭窄场地进行地坑开挖，既保证了工程质量又有其特色。     

砼回弹法测强统计分析

简述了砼回弹法测强与抗压强度对比试验的方法，得出了影响砼回弹测强的种种因素，通过统计分析给出了砼回弹测强的实用计算公式，从而就可在结构物上直接进行回弹测强，达到及时，方便，准确地了解结构物的强度．     

八里庄钢筋混凝土桥控爆拆除

文中介绍在周期建筑，电力、电信等设计密集的环境中，爆破一座结构坚固的大型钢筋混凝土桥梁和桥台浆砌块石的爆破参数设计，局部部位技术处理措施以及孔内孔外延时相结合的非电起爆网路。     

Surface treatment for adhesive-bonded joints by excimer laser

In this work a treatment for surface preparation to improve mechanical resistance in adhesive bonding of plastic composites reinforced with fibres and metallic material, has been performed using an excimer laser. The following couplings have been selected to reproduce joints commonly used in the aerospace and automotive industry: CFC (carbon fibre composite) with CFC, CFC with Al 2024T3, Al 99% with Al 99%, GFC (glass fibre composite) with zinc-coated sheet in low carbon steel FeP01. The surfaces have been prepared using an excimer laser, adopting several values of laser parameters. The obtained surfaces have been examined by optical and scanning electron microscope: comparative measures of wetting and roughness have been performed to obtain an accurate characterisation and to select the proper finishes suitable to improve the mechanical resistance of the joints. The results obtained show that laser treatment always improves the final resistance of the joint; notable increases, and no significant surface damages have been highlighted. Better results have been obtained with the Al 99% with Al 99% joints which, with a low number of pulses treatment, have shown an increase of mechanical resistance up to the 70%.     

Preparation of micro-arc oxidation coatings on magnesium alloy and its thermal shock resistance property

1. Introduction Due to their high specific strength, good electro-magnetic shielding characteristics, high damping characteristics, good cast ability, and excellent pol-ishing capability, magnesium alloys are extensively used in aeronautical, automobile, and electro- communication industries [1-3]. But magnesium has some disadvantages, such as low chemical stability, high negative electric potential, and low hardness, so it is necessary to use surface disposal to accommo-date the demand for re…     

Mg-Nd-Zn-Zr稀土镁合金的热变形行为

采用GLEEBLE-1500热模拟机对Mg-Nd-Zn-Zr稀土镁合金在温度为250～450.℃、应变速率为0.002～0.100.s-1、最大变形程度为60%的条件下, 进行高温压缩模拟实验研究. 分析了实验合金在高温变形时的流变应力和应变速率及变形温度之间的关系, 计算了变形激活能和应力指数, 并研究了在热压缩过程中组织的变化, 为确定该稀土镁合金的挤压温度提供了实验依据. 结果表明: 合金的峰值流变应力随应变速率的增大而增加, 随温度的升高而降低; 合金的变形激活能在300～400.℃内变化不大, 而在400～450.℃时增加很大; 根据实验分析认为该稀土镁合金挤压温度定在350～400.℃左右为宜; 在350.℃左右顺利挤出的实验合金有很好的力学性能: σb=275.5.MPa, δ=13.5%.     

新型铸造镁合金开发现状

总结了近年来镁合金在高温抗蠕变、高韧性、高强度、高耐蚀性、降低成本和改善工艺性六大热点研究方向上取得的典型研究成果，重点阐述了对高温抗蠕变铸造镁合金的研究。并从热力学角度分析了镁合金中可能出现的各相对镁合金高温蠕变过程的影响，叙述了Mg-Al、Mg-Zn和Mg-RE系耐热合金的最新发明。